KF460 is an innovative terminal for management employee attendance and basic access control functions. User verification is performed using face recognition (standard) or ID/MF cards (optional). The verification process takes less than 1 second. The user-friendly UI provides customers with a quick and easy experience. Data transfer can be done through your TCP / IP or

IP Based Fingerprint Access Control & Time Attendance

The SF100 is an IP based fingerprint terminal works both in network and standalone modes. In network mode, it can connect with ZKAccess3.5 software for access control and time attendance management. Wiegand output makes SF100 flexible to connect with ZK or any 3rd party controllers as a slave reader. Additionally wiegand input allows two units of SF100 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit.

Meanwhile, anti-passback function can be used to maximize the security. Auxiliary input interface allows SF100 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.

Time Attendance & Access Control Terminal with Adapter

Biometric and Time Management Solutions

F16 is a fingerprint access control terminal with an integrated proximity reader (EM). It is IP65 rated which enables it to be resistant from water, dust and other outside damages. It can be installed easily on your network having both Ethernet and RS485 serial ports. Weigand-OUT port allows connection of reader to ZK or any 3rd party access control panels panel. Using Weigand-In port, you can connect to any card readers for authentication at both entrance and exit.

The PULL firmware and ZKAccess3.5 are the standard configurations which make F16 more versatile and powerful. Users can be registered on the device by the Management Card or through connecting with ZKAccess3.5 software by TCP/IP.

Facial Recognition Terminal with 5-inch Touch Display

SpeedFace-H5 facial scanner / reader is a new Facial Recognition Terminal with Enhanced Visible Light Facial Recognition with Deep Learning built-in. The recognition distance has been greatly extended up to 3 meters long, which significantly improves maximum traffic rate. While most of algorithms only support 15-degree angle facial recognition, supports 30-degree angle facial recognition. Speedface facial scanner / reader has features such as Enhanced Visible Light Facial Recognitoin with Deep Learning built-in, 3-in-1 verification with Fingerprint, RFID and Facial Recognition, 5-inch touch LCD, Dual-camera for real-time face detection, 6,000 face template capacity, Recognition distance: 0.3 - 3 m, Compatible with external RS232, RS485 and Wiegand reader, and TCP / IP, Wi-Fi communication

Multi-Biometric Time & Attendance Terminal with Basic Access Control

The MultiBio 600 is a Time & Attendance terminal with basic access control functions for the SME market. This device features our advanced fingerprint and facial recognition algorithms which ensures high verication speeds. The MB600 does have Wi built-in as well as normal TCP/IP connection and USB download available for exible communication solutions that can be used in different installation environments.

Outdoor Fingerprint, Code & RFID Outdoor Stand Alone Reader

F17 Biometric Fingerprint Reader is one of the world’s smallest Ethernet connection-based fingerprint terminals, used for access control and time attendance features, with IP65 waterproof housing.
With its IP65 rated rugged waterproof and dustproof structure, F17 offers extra durability in harsh conditions such as outdoor environments. It is specially designed for standalone applications such as house, office, shop, garage, factory and others.

The 2013 version of F17 is equipped with a sensor cover to protect the optical reader and updated with new firmware that supports ZKAccess3.5 management software which has versatile features and powerful functions.

Fingerprint Reader Time Access control

The F18 fingerprint reader is an innovative biometric fingerprint reader for access control applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent verification speed. The F18 fingerprint reader features the fastest commercial-based fingerprint matching algorithm and TAS high-performance, high-image quality optical fingerprint sensor. The device offers the flexibility to be installed as a standalone device or with any third party panel that supports 26-bit Wiegand. All the operation can be done on the TFT LCD display. A fingerprint image will display on the LCD screen, this will guide the user to put their finger on the correct position in order to increase the recognition rate.

Biometric Fingerprint Access Control

The X7 fingerprint reader is an innovative biometric fingerprint reader for access control applications. It offers unparalleled performance by using an advanced algorithm for reliability, precision and excellent matching speed.
As a terminal designed for users who have common access control requirement, it can operate on standalone mode with the interface for third party electric lock, exit button, door sensor, alarm and bell. The keypad operation on the device is easy and convenient, such as 'Enroll user', 'Delete user' and 'Access control parameter settings' etc.

Fingerprint Reader Time Attendance

K30 is a 2.8-inch TFT screen Time Attendance. TCP/IP and USB Host make data management extremely easy. Most importantly, the build-in backup battery can eliminate the trouble of power-failure. With elegant appearance and reliable quality, you can get the best from it.
The biometric device can be integrated into most softwares as well as being able to work offline by communicating over the network. It can hold fingerprint, RFID card and password information within the capacities specified in the specifications and there are also functions of stopping the movement of the elements such as door-to-door tourniquet in accordance with this information.

The memory can hold the log and share these logs over the network instantly with USB. K30 is a 2.8-inch TFT screen Time Attendance Terminal. TCP/IP and USB Host make data management extremely easy. Most importantly, the built-in backup battery can eliminate the trouble of powerfailure. With elegant appearance and reliable quality, you can get the best from it.

Time Attendance Software

Its finally here. Our new Time and attendance Software called Universal Time and Attendance. The Time & Attendance that will cater for your needs. Universal Time & Attendance has a multi-user platform that allows users to manage information and reports simultaneously (stand-alone, Lan or Wan). Normal time, Overtime, Saturday overtime, Sunday overtime, Late arrivals, Early departures, Long lunch or Smoke breaks are all standard features and all are available on reports. Fixed shifts, Rotating shifts and Auto shift detection ensure precise time calculations to provide flawless timesheets and reports. Time and attendance Reports can be exported into any electronic format and can be automatically emailed to supervisors or managers providing seamless efficiency.

TIME AND ATTENDANCE SOFTWARE TECHNICAL SPECIFICATIONS:

• True Windows 32/64Bit (SQL Database)
• Multi-User (Access software across network via multiple users)
• Multi-User View Option (Department, Cost Centre or Company)
• System Security "Multiple User" Log in and Password protection
• Employee Master File has personnel notes with photo linking option
• Employee Disciplinary and Warnings records - with full reporting
• Employee Training Module
• Leave Module "Book your user definable leave in advance "Paid or Un-Paid"
• Employee and Machine costing reports are available
• Employee Rostering with Schedules and hour targets
• Employee's Clocking can be corrected
• Employee's Hours can be adjusted with a "reason code"
• Detailed "Ms-Excel" look alite clocking and hours editing screen
• Multiple Public Holiday Calendar
• User definable absenteeism codes
• Standard A.W.O.L code for employees with "no clocking's" on a "Compulsory Work Day"
• Each Manager can run or print their own reports "View to Screen or Print option"
• User definable system codes (Company, Grades, Occupation, Department)
• Fixed Shifts, Rotating Shifts, Employee Rosters or Auto Shift Detection rules
• Fixed or Flexible lunch, tea or toilet/smoke breaks
• First & Last clocking's option for managers and supervisors
• Comprehensive reporting: All reports can be printed as Hours, Minutes OR Decimals
• Detailed clocking's and hours summary reports
• Absenteeism/Late Arrival and Early Departure (Exception reports)
• Employee, Department and Cost Centre Analysis Reports
• Balancing Reports option
• Reports can be exported to Excel, CSV, HTML and PDF formats for "Email"
• Bulk Clocking's and Hours allocation
• Secure Backup and Restore feature (Local or Network drivers)
• Universal Time and Attendance has a standard payroll package exports
• VIP Payroll Business Partner
• User definable payroll periods
• Customised Reports
• Customised payroll exporting
• Automatic Reports engine, emails reports to Managers & Supervisors daily